To use Raspberry device, we need NOOBS boot loader to install any IoT Operating system such as Raspbian or Ubuntu mate.
Following are the steps to install the NOOBS in SD card.
1. Insert an SD card that is 4GB or greater in size into your computer.
(Preferred to use SD card adapter or SD Card reader).
2. Format the SD card using the platform-specific instructions below: (Formatting tool might have only less than 500kb.)
a. Windows
i. Download the SD Association's Formatting Tool from SDFormatter windows
ii. Install and run the Formatting Tool on your machine
iii. Set "FORMAT SIZE ADJUSTMENT" option to "ON" in the "Options" menu
iv. Check that the SD card you inserted matches the one selected by the Tool
v. Click the "Format" button
b. Mac
i. Download the SD Association's Formatting Tool from SDFormatter Mac
ii. Install and run the Formatting Tool on your machine
iii. Select "Overwrite Format"
iv. Check that the SD card you inserted matches the one selected by the Tool
v. Click the "Format" button
c. Linux
i. We recommend using gparted (or the command line version parted)
ii. Format the entire disk as FAT
3. Extract the files contained in this NOOBS zip file.
(You can download NOOBS.zip from the following link.
NOOBS Latest )
4. Copy the extracted files onto the SD card that you just formatted so that this file is at the root directory of the SD card. Please note that in some cases it may extract the files into a folder, if this is the case then please copy across the files from inside the folder rather than the folder itself.
(You can find these instructions in readme.txt in extracted files)
5. Insert the SD card into your Pi and connect the power supply.
Your Pi will now boot into NOOBS and should display a list of operating systems that you can choose to install.
(You need to connect to internet to download the Operating system by NOOBS)
If your display remains blank, you should select the correct output mode for your display by pressing one of the following number keys on your keyboard:
1. HDMI mode - this is the default display mode.
2. HDMI safe mode - select this mode if you are using the HDMI connector and cannot see anything on screen when the Pi has booted.
3. Composite PAL mode - select either this mode or composite NTSC mode if you are using the composite RCA video connector.
4. Composite NTSC mode
Following are the steps to install the NOOBS in SD card.
1. Insert an SD card that is 4GB or greater in size into your computer.
(Preferred to use SD card adapter or SD Card reader).
2. Format the SD card using the platform-specific instructions below: (Formatting tool might have only less than 500kb.)
a. Windows
i. Download the SD Association's Formatting Tool from SDFormatter windows
ii. Install and run the Formatting Tool on your machine
iii. Set "FORMAT SIZE ADJUSTMENT" option to "ON" in the "Options" menu
iv. Check that the SD card you inserted matches the one selected by the Tool
v. Click the "Format" button
b. Mac
i. Download the SD Association's Formatting Tool from SDFormatter Mac
ii. Install and run the Formatting Tool on your machine
iii. Select "Overwrite Format"
iv. Check that the SD card you inserted matches the one selected by the Tool
v. Click the "Format" button
c. Linux
i. We recommend using gparted (or the command line version parted)
ii. Format the entire disk as FAT
3. Extract the files contained in this NOOBS zip file.
(You can download NOOBS.zip from the following link.
NOOBS Latest )
4. Copy the extracted files onto the SD card that you just formatted so that this file is at the root directory of the SD card. Please note that in some cases it may extract the files into a folder, if this is the case then please copy across the files from inside the folder rather than the folder itself.
(You can find these instructions in readme.txt in extracted files)
5. Insert the SD card into your Pi and connect the power supply.
Post Installation instructions :
Your Pi will now boot into NOOBS and should display a list of operating systems that you can choose to install.
(You need to connect to internet to download the Operating system by NOOBS)
If your display remains blank, you should select the correct output mode for your display by pressing one of the following number keys on your keyboard:
1. HDMI mode - this is the default display mode.
2. HDMI safe mode - select this mode if you are using the HDMI connector and cannot see anything on screen when the Pi has booted.
3. Composite PAL mode - select either this mode or composite NTSC mode if you are using the composite RCA video connector.
4. Composite NTSC mode
No comments:
Post a Comment